Can’t Source the Part? Here’s What You Can Do. The machine is fine. The part is the problem. An obsolete component. A discontinued part. A supplier that no longer exists. A drawing that has disappeared. Whatever the reason, finding a replacement for a critical component can quickly become a much bigger problem than the part itself. But if you have the physical component, you may already have what you need to recreate it. BMS Design can use the existing part to capture its ge

📍 3D Site Survey | The Dog at Peover, Knutsford We recently carried out a full 3D site survey of The Dog at Peover in Knutsford to create an accurate site survey and floor plans for fire escape and emergency planning. The plans will be printed and displayed in all bedrooms, helping ensure that staff, guests and new team members are fully aware of the fire exits and designated assembly point in the car park. 🔥🚪 While on site, we also captured a complete exterior 3D scan in

BMS reverse engineered and 3D scanned two 6 meter long industrial plastic mixer screws & 19 associated assembly parts for emergency...

Scan to CAD 👍 Same day Service 👍 7 days a week 👍 please call or email for any questions dan@bmsdesignltd.co.uk 01565 325005 One...

Thames Clipper Boat Survey 3D Scan using a faro focus scanner, this is so the ship yard can retrofit a bridge extension to the rear of...

These medical instruments were firstly 3D scanned and then converted into parametric 3D CAD models.